Smart Keys - II Morrow Inc. 50 User Manual

Introduction
SYS (System Mode)
Press the
SYS
System mode is used to make system level
adjustments and modify Nav function displays.
SKIP (Start-Up Option)
Press the
SKIP
bypass the start-up tests. This is for emergencies as
the IFR tests must be completed to allow IFR flight.
Map The Moving Map function uses several "smart" keys
Function
to allow you to declutter the map, find waypoint

Smart Keys

information, and setup your map information.
Map Waypoint Keys
APT, VOR, INT, NDB, & USR
The map waypoint "smart" keys are present when the
APT NDB
Moving Map pages are displayed. Press the "smart"
VOR USR
key to control the display of the waypoint type. There
are three selections possible: waypoint identifier and
INT
location symbol, location symbol only, and off.
Pressing the "smart" key subsequent times will
control which selection is made. Map waypoint
choices are: Airport (APT), VOR, NDB, Intersection
(INT), and User (USR).
A solid, reversed waypoint type annunciator above the
APT
"smart" key means the waypoint identifier and
location symbol will both be displayed.
A bold outline of the waypoint type annunciator will
APT
show only a symbol on the waypoint location.
A thin outline around the waypoint type means that it
NDB
is turned off and no information for that waypoint
type will be displayed on the map.
Waypoint LIST Key
Each press of this key scrolls through the available
2
"smart" keys.
1-6
key to reach the System mode functions.
SYS
key during the start-up procedure to
SKIP