II Morrow Inc. 50 User Manual page 209

suspends leg-sequencing at that waypoint and lights
the OBS/HLD annunciator.
Subsequent pressing of
the waypoint selection and OBS DTK choices.
Manually
Approach operations often result in the need to
Selecting a
manually select a leg of the active flight plan. Manual
Flight plan Leg
leg selection will often be required when operating
with Radar vectors and there is the need to intercept
an approach course. It may also occur when flying a
DME-ARC to intercept an approach course. You
cannot manually select a DME-ARC as a flight plan
leg.
1. Press
FPL
2. Press
ENTER
3. Press
ENTER
to reach the active leg of your flight plan.
FPL
Then, turn the
SMALL
leg.
LGD to BKE
2** 146° 28.2nm
arpt
.
ENTER
LGD to BKE
Press ENTER
to Activate leg
to accept the displayed destination
ENTER
waypoint. The unit will then go to NAV mode.
Approach Basics (GX50/60)
toggles between
DIRECT-TO
knob to display the desired
iaf
9-19