II Morrow Inc. 50 User Manual page 295

lock is hard to turn or the unit does not seat fully, the
unit is probably binding and the mounting tube
should be checked.
Starting the The following procedure is used to start the flight
Flight
simulation. It is recommended that you have a data
Simulation
card properly inserted into the data card slot so you
can use the appropriate functions.
1. Turn on the power for the power supply. Press and
NAV
hold down the
for the Apollo GX.
2. The Apollo GX will run its database and memory
tests. The display will then show that it is ready to
start the Flight Simulator.
Flight Simulator
3. Press
SEL
ground speed and altitude will be displayed. The
ground speed value will flash. Turn the
knob to display the desired ground speed. Speed
values are changed in 10 kt increments.
Simulator Setups
Gr Speed 100kts
Altitude 1000ft
4. Turn the
flash. Turn the
altitude. Altitude values are changed in 100 ft
increments.
Simulator Setups
Gr Speed 170kts
Altitude 4500ft
5. Press
ENTER
and altitude values and start the flight simulation.
key as you turn on the power
NAV
NOT FOR FLIGHT
Press SEL
to start the Flight Simulator. The default
SEL
knob to make the altitude value
LARGE
knob to display the desired
SMALL
to enter the displayed ground speed
ENTER
Flight Simulator
SMALL
12-3