II Morrow Inc. 50 User Manual page 56

Navigation Basics
Set up your Auto-Descent by selecting:
·
·
·
·
1. While viewing either the Auto-Descent or End Alt
SEL
2. Turn the
3. Turn the
4. Turn the
ENTER
5. Turn the
ENTER
3-18
Distance from destination waypoint (0 - 99 nm)
or Offset Distance
Ending altitude (-1,500 - 50,000' in 50' steps)
Descent rate (100 - 5,000'/min in 10'/min steps)
Estimated ground speed (50 - 600 kts)
page in the Altitude Assist function, press
Offset Distance value will flash. Turn the
knob to change the Descent Offset Distance value.
End 5nm before
PDX at 1027'
500'/min 200kts
knob to the destination waypoint
LARGE
field. Turn the
SMALL
the field. You can choose from the remaining
waypoints in your flight plan.
knob to the Ending Altitude value.
LARGE
Turn the knob to change the value. The
SMALL
default value is 1000 ft above the airport elevation.
knob to the Descent Rate and
LARGE
Estimated Speed with the
knobs. Press
ENTER
values.
knob to the Auto Descent page, if
SMALL
necessary. Your recommended glide slope and
ending altitude are shown. Press
(ready) Auto Descent. Press
it.
knob (cw or ccw) to change
and
LARGE SMALL
when you have set all of the
ENTER
again to cancel
ENTER
. The
SEL
SMALL
to activate