Procedure Turns - II Morrow Inc. 50 User Manual

Procedure A procedure turn is a way of crossing the same
Turns
waypoint more than once in order to accomplish a
course reversal. First, make sure that flight plan leg
sequencing is suspended. Second, after crossing the
waypoint, set the correct inbound course to intercept.
Finally, enable sequencing when you are established
inbound.
Suspend Sequencing
When a procedure turn or course reversal is required,
press
OBS/HLD annunciator will light. In the cases shown
in the diagram below, the Apollo GX will know when
a course reversal is required and will automatically
suspend sequencing.
Entry at IAF
Press HOLD manually.
Set Inbound Course
ENTER
1. Upon crossing the waypoint you will be prompted
to suspend sequencing. The
OBS/HOLD
Entry at IFAF (Combined) or FAF
If the angle is <70º, then
IAF
press HOLD manually.
If the angle is >70
HOLD is automatic.
FAF
MAP
to set the OBS course. Press
OBS desired track page.
Press ENTER to
set OBS Course;
NAV/MAP to exit
Approach Basics (GX50/60)
º, then
Angle
to reach the
ENTER
IFAF/FAF
MAP
9-21