II Morrow Inc. 50 User Manual page 218

Approach Basics (GX50/60)
3. The Course Intercept alert will appear as you
Navigating
The Apollo GX may be used to help guide you to
to a DME
near the start of an ILS approach by using the
location of a DME as a destination waypoint. The
waypoint type is labeled "LOC-DME," which stands
for the Localizer-DME pair. Be careful when using
this waypoint as the Localizer location and the DME
location are often in separate locations. Your Apollo
GX will use the DME location as the waypoint. Do
NOT use the DME location as the start of the
approach.
You may use the DME waypoint as a guide to the
start of your approach and as a distance reference
point for a step-down approach.
1. Press
2. Turn the
3. Repeat step 2 until you have selected the
4. Navigate to the DME waypoint according to
5. After reaching the waypoint, follow the directions
9-28
become established inbound on the final approach
course.
Course Intercept
Next Dtk
. The Waypoint Type will flash.
DIRECT-TO
Turn the knob to select the "LOC-DME"
SMALL
waypoint type.
knob clockwise one click. The first
LARGE
character of the LOC-DME Waypoint Name will
flash. Turn the
SMALL
character.
LOC-DME. Press
ENTER
the selected waypoint.
Bearing and Distance.
of the appropriate approach plate for navigation.
312°
knob to select the desired
to navigate Direct-To