II Morrow Inc. 50 User Manual page 50

Navigation Basics
Setting Runway Limits for Nearest Waypoints
Narrow the type of airports that you will accept by
choosing the runway length, lighting, and surface
type. The Runway Limits selection also controls the
airports that are displayed in the Map function.
1. While in the Nearest Waypoint Search function,
2. Press
SEL
3. Turn the
3-12
turn the knob to view the "Runway Limits"
LARGE
display.
Runway Limits
HARD/SOFT/WATER
Ft:0 Lit:No
. The runway length value will flash.
SEL
Turn the knob to select the minimum
SMALL
runway length you want considered. Choosing a
length of 0 feet means you will accept any runway
length. Choosing a runway length, for instance, of
5,000 feet, will not show an available airport with a
runway length less than 5,000 feet either for a
Nearest Waypoint or as an airport icon on the Map
display. Note that a waypoint with a runway of 0
length will not appear on either the nearest list, or
on the map, if a length is set for the runway limit
that is greater than 0. User Waypoints will show.
Runway Limits
HARD/SOFT/WATER
Ft:3500 Lit:No
knob to move to the next selection.
LARGE
With the "Lit" value flashing, turn the
to choose "Yes" or "No" for the runway lighting
requirement.
Runway Limits
HARD/SOFT/WATER
Ft:3500 Lit:Yes
knob
SMALL