II Morrow Inc. 50 User Manual page 252

Approach Examples
Manually select the leg from BTG to OLM (which is
V287). Even though you have not yet reached BTG,
you will know when you have intercepted this course.
1. Press
FPL
FPL
Note that on the second line of each leg page, a
number appears to indicate the leg number. An
Asterisk is used after the number of each leg to
indicate the active flight plan.
Two asterisks after the leg number indicate the active
leg of the active flight plan (SLE to BTG).
2. Turn the
ENTER
ENTER
3. Now fly the ATC assigned heading of 360 until the
9-62
twice to reach the active plan in Flight
FPL
Plan Mode. This example uses a flight plan from
the Salem (SLE) airport to the Battle Ground
(BTG) VOR and then to the Olympia (OLM)
VOR. Turn the
SMALL
view the first leg of your flight plan.
SLE to BTG
1** 001° 53.2nm
arpt vor
BTG to OLM
2* 331° 74.4nm
vor vor
knob until the leg you wish to
SMALL
activate is shown and then press
CDI centers to indicate that we have intercepted
V287.
knob clockwise one click to
twice.
ENTER