II Morrow Inc. 50 User Manual page 22

Introduction
Communicati The Recall (RCL), Monitor (MON), Memorize
ons Radio
(MEM), and
Mode Smart
the GX60/65 after the
Keys
(GX60/65)
COM (GX60/65)
Press the
COM
radio functions.
Flip/Flop (GX60/65)
Press the
< >
(left-most) and standby (right-most) frequency while in
the Com function. You may use an optional external
FLIP/FLOP
control. Switching between frequencies is disabled while
you are transmitting or editing in any function.
RCL (Recall) (GX60/65)
Press the
RCL
database.
MON (Monitor) (GX60/65)
Press the
MON
When the Active frequency receives a signal, the
GX60 will automatically switch to the Active
frequency.
MEM (Memorize) (GX60/65)
Press the
MEM
frequency.
XIT (Exit) (GX60/65)
The
XIT
in the
pressed to allow use of the radio during startup
testing. Press the
sequence, or wait for test completion. The
will disappear when testing is complete.
1-8
FLIP/FLOP
COM
key to operate the Communications
COM
key to switch between the active
FLIP/FLOP
key for the same operation as the front panel
key to recall frequencies stored in the
RCL
key to listen to the Standby frequency.
MON
key to store the current Standby
MEM
key will appear on the far left of the display,
XIT
key position, if the
MSG
key to return to the start-up
XIT
(<->) keys are available in
soft key has been pressed.
key has been
COM
key
XIT