II Morrow Inc. 50 User Manual page 202

Approach Basics (GX50/60)
Canceling the Approach will result in returning to
Approach Transition operation. The Approach Active
light will go out and the CDI will smoothly scale back
to 1.0 nm sensitivity. Once Approach Active has been
canceled by the pilot, it cannot be made active again
except by again crossing the FAF inbound.
Crossing the Final Approach Fix
1. You are now in Approach Active operation. The
2. The OBS/HOLD annunciator will light. Flight
Missed Approach Point (MAP)
1. The MSG annunciator will indicate a standard
MSG
MSG
9-12
Verify that the
annunciator illuminates at the FAF. If for
any reason it is not on, do NOT continue
the approach.
Approach Active annunciator will light
continuously. If the Approach Active annunciator is
not lighted continuously, do NOT continue the
approach.
Plan leg sequencing is suspended with the MAP as
the current TO waypoint.
Waypoint Alert as you approach the MAP. Press
the key to acknowledge the message. Press the
MSG
key to return to the previous function.
MSG
MAP
APPRCH Anunciator On
Note
Approach Active
Approach
Transition Operation
CDI Scale = 1.0nm
Proceed to
MAHP
Selected
Waypoint
CDI Scale
Transitions
0.3 nm to 1.0 nm
If Missed Approach
Selected
At or After MAP,
Press OBS/Hold
for Missed Approach