LifeCore Fitness LC-985VGS User's Product Manual page 13

2. DISPLAYS
When powering the 985VG for the first time, you can set the current time (24:00 clock) and date.
This information will be stored in the console and displayed during "sleep mode". The console will
prompt you through the setting process; use UP/DOWN knob to adjust the settings and press
ENTER to confirm.
Dot Matrix Profile Window: Displays program profile during program setting and executing. The
program profile will be different depending on which program is selected.
There are 20 columns of LCD representing 20 segments of time; each time segment will represent
or equal = total program time divided by the 20 columns. During a workout, a column of LCD will
blink to indicate the time segment you are currently in during that point in time.
There are also 16 rows of LCD representing 16 levels of resistance. Each LCD row represents 1
level of resistance and during a workout; a column(s) of LCD will blink to indicate the resistance level
you are currently in during that point in time. The appropriated row of LCD will light up when you
adjust the resistance level.
A. Data Display Windows: There are 6 data display windows displaying time, speed/RPM,
distance, calories, watt and pulse. While setting up a program, the appropriated data window will
blink to indicate which data you are currently setting. Rotate the UP/DOWN adjustment dial to adjust
the value and press the ENTER key to confirm the value.
Note:
I. Setting a number other than 0 in those display windows will count the number down. If data
display setting is set at 0, the reading will count up.
Note: Display sleep mode: If user stops pedaling for 4 minutes, the display will shut down
and enter a "sleep mode." Previous activities will be stored. To resume, simply press a
button on the console or pedal again.
B. Big Data Window: All of above data will be displayed in this window also in a bigger format.
It displays one at a time for few seconds before switch to the next one.
3. Function Keys: There are 5 function keys for program operation.
A. START/STOP Key: Pressing the START/STOP key once will start the program and all data
will begin to count. Press the START/STOP key again to stop the computer program. To resume,
simply press START/STOP one more time to start program.
B. RESET Key: When program time is not counting, press the RESET key once to reset the
computer back to the beginning of a program selection. All previous recorded value such as: time,
distance, calories and pulse will be reset to 0, unless a user specifically entered a data value in the
data display window prior to starting a program. To reset the data value in a display window, simply
go back into a program and press enter until you reach the display window you want to change. Use
the adjustment dial to adjust the value, next press enter then reset to clear. Pressing and holding the
RESET key for 2 seconds will activate a total reset returning a user back to user profile selection.
Page | 12