Setting Up Your Elliptical - LifeCore Fitness LC-985VGS User's Product Manual

Setting Up Your Elliptical

Height Adjuster Cap
Important: Make sure that the LC-985VGS is always positioned in a location that has a solid level
floor. It is recommended that if this elliptical is being placed on a hardwood, tile or any delicate
surface that a protective mat is placed under the machine to help prevent damaged to the
machine and/or damage to the flooring surface. Please contact your dealer to purchase a
compatible mat for this machine.
1) To stabilize your elliptical, first make sure the left and right front stabilizer wheel caps (112 &
113) are touching the ground.
2) Determine which side of the machine is unstable. Using the rear stabilizer caps (119) in the back
of the machine, adjust the dial clockwise (lower) or counter-clock wise (Lift) to help lift or lower
the back of the machine to stabilize it.
Foot pedal Adjustment
1) To adjust the foot pedals, simply loosen Qty. 2 foot pedal knobs (116) on each side of the foot
pedals.
2) Slide the adjustable foot pedals (115) to the desired setting using the number labels as a guide.
(1-5) Slide the edge of the adjustable foot pedal to the gray line of desired number.
prevent injury, make sure that each foot pedal is adjusted to the same number.
3) Retighten foot pedal knobs (116) firmly on both sides of the adjustable foot pedal.
Note: To
Page | 7