Z Zigzag Lever Assy. Attachment; Z Zigzag Lever Assy. Assembly - Brother XR9000 Service Manual

Main unit
8

Z zigzag lever assy. attachment

1. Attach the polyester slider 2 to the Z zigzag lever shaft 1 of the base
holder assy..
2. Apply a bead of EPNOC AP (N) 0 to the Z zigzag lever shaft 1 of the base
holder assy..
3. Attach the Z zigzag lever assy. 3, and then attach the retaining ring (E4).
*Key point
• Place the caulking shaft 4 on the left side of the Z-zigzag cam
5.
Apply EPNOC AP (N) 0 to the Z zigzag lever shaft of
the base holder assy..
8-1

Z zigzag lever assy. assembly

1. Attach the Z zigzag cap 2 to the Z zigzag lever 1.
3 - 42
Needle-presser unit
2
Bead
XC8387***
4
3
1
5 Retaining ring E4
1
2