Main unit
33
Face plate A assy. attachment
1. Attach the face plate A assy. 1 with the screw 1.
1
33-1
Face plate A assy. assembly
1. Attach the NT lower thread cutter 2 to the cutter cover 1, and then attach
the CS retaining ring 3.
*Key point
• Insert the narrow edge of the NT lower thread cutter 2 into
the cutter cover 1 first.
• Align the tab of the CS retaining ring with the groove on the
shaft of the cutter cover 1.
2. Attach the cutter cover assy. to face plate A 4 with the screw 1.
1
3 - 22
Main parts
Taptite, Cup P
M4X20
Taptite, Bind B
M3X12
Torque
·
0.78 — 1.18 N
m
Torque
·
0.39 — 0.78 N
m
1
1
3
2
1
1
Comments to this Manuals
Latest comments: