Pattern - Brother XR9000 Service Manual

Adjustment
1. Turn on the power.
2. Press the Character stitch key.
3. Select the pattern number "59" (Stitch adjustment
mode).
4. Set the "0" by pressing the Stitch length adjustment
key.
5. Turn off the power.
6. Ready the sewing machine.
Presser foot
Upper thread/Lower thread
Cloth
Thread tension dial position
7. Start the test mode, and then select the pattern number "14" (Pattern adjustment mode).
8. Sew the pattern.
9. Change the correction value by pressing the Stitch length adjustment key so that length of 5 patterns should be 36
to 44mm.
Skip the first pattern
If the length of 5 patterns is shorter than 36mm
•
Press the
"+"
stitch.
If the length of 5 patterns is longer than 44mm
•
Press the "-" side of the key to shorten the stitch.
4 - 22

Pattern

N presser foot
Shappe Span thread #60
Two-ply broad cloth
4
1 2
side of the key to lengthen the
ABC
Character stitch key
Stitch length adjustment key
3 4 5
36 to 44mm.
ABC
6 7