Base Plate Rubber Removal; Upper Cover Thread Guide Removal; Main Pcb Assy. Removal - Brother XR9000 Service Manual

Main unit
17

Base plate rubber removal

1. Remove the 2 base plate rubbers 1.
18

Upper cover thread guide removal

1. Remove the upper cover thread guide 1.
19

Main PCB assy. removal

1. Reconnect the all connectors from the main PCB assy. 1.
2. Remove the screw 1, and then remove the lead wire assy. 2 from the
main PCB assy. 1.
*Key point
• Remove the each lead wires from the guide parts of the
shutter cover 3.
3. Remove the 2 screws 2, and then remove the shutter cover 3 from the
rear cover assy..
4. Remove the 3 hooks, and then remove the main PCB assy. 1 from the
shutter cover 3.
Main parts
1
1
2 3
1 2
1
2
2 - 13