Vertical Lever Attachment - Brother XR9000 Service Manual

Main unit
5

Vertical lever attachment

1. Insert the vertical feed shaft 1 into the inside of the drop knob 2, and
then insert the plain washer (L4) 3, spring
drop knob 5 in this order.
*Key point
• Determine which end of the vertical feed shaft 1 is closer to
the retaining ring and hold this end, and insert the shaft from
the left side of the base plate assy..
2. Attach the 2 retaining rings (E3).
3. Place the groove on the vertical feed shaft 1 inside the base plate assy. 6,
and attach the retaining ring (E3).
4. Move the vertical feed shaft to the left, and attach the retaining ring (E3).
S07
3 - 28
Feed unit
, vertical lever 4, and
S07
11
5.7
4
Retaining ring E3
5
SPRING
XC2550***
2
1
Retaining ring E3
3
Retaining ring E3
S07