Vertical Lever Attachment - Brother BC800 Service Manual

Main unit
5

Vertical lever attachment

1. Insert the vertical feed shaft 1 into the inside of the drop knob 2, and
then insert the plain washer (L4) 3, spring
drop knob 5 in this order.
*Key point
• Determine which end of the vertical feed shaft 1 is closer to
the retaining ring and hold this end, and insert the shaft from
the left side of the base plate assembly.
2. Attach the 2 retaining rings (E3).
3. Place the groove on the vertical feed shaft 1 inside the base plate
assembly 6, and attach the retaining ring (E3).
4. Move the vertical feed shaft to the left, and attach the retaining ring (E3).
Start movie clip (CD-ROM version only)
S07
Feed unit
, vertical lever 4, and
S07
11
5.7
2
4
S07
Retaining ring E3
5
SPRING
XC2550***
1
Retaining ring E3
3
Retaining ring E3
3 - 25