Angle Settings - Invacare rea Azalea Assist Manual

5.3 ANGLE SETTINGS

B
A
There is a possibility to change the range of avail-
able angles for the seat by changing the position of
the gas spring (A) on the chassi attachment (B).
This procedure may only be performed
by a service technician!
Azalea Max can only use hole II (D). Except for the
cases where electric tilt and angle controls are used,
then ONLY hole I (C) may be used.
Other Azalea models might use either hole. Except
for the cases where electric tilt and angle controls
are used, then ONLY hole 1 (C) may be used.
The wheelchair should be tipped
over sideways before the gas spring is
loosened from the chassi attachment.
Otherwise there is a risk of pinching.
Angles obtained:
Hole I:
16'' rear wheels -1° - +23°
24 '' rear wheels -1° - +23°
Hole II
16'' rear wheels +1° - +25°
24'' rear wheels +1° - +25°
Azalea
R
D
C
15