Brakes - Invacare rea Azalea Assist Manual

5.12 BRAKES

5.12.1 User brake
5.12.1.1.Use
Start by checking that the tyres have the correct air
pressure (printed on the side of each tyre).
1.
The user brake is to be used when the chair is not
moving, and is not intended for reducing speed
when the chair is moving.
To apply the brake, move the lever (A) forwards.
To release the brakes, move the lever towards the
rear (towards you).
Be careful not to trap your fingers between
the brake pin (B) and rear wheel.
5.12.1.2.Adjustment
A
C
B
Tool: 5 mm Allen key
2. To attain the correct braking effect, the brake pin
should press into the tyre when you apply the
brake. The brake may therefore require depth
adjustment. Loosen the screw (A) and move the
brake attachment to the required position. Re-
tighten the screw (A). There should be a distance
of approximately 6 mm between the pin (B) and
the tyre (C).
Be careful not to trap your fingers between the
brake pin (B) and rear wheel.
Incorrect setting or use of the brake reduces
the braking effect.
Azalea
R
5.12.2 Carer operated brake
1.
A
2.
3.
1. Braking when moving: squeeze both brake handles
upwards, and the brake will be applied.
2. Locking the brakes: squeeze the handle and move
the lock catch (A) upwards. Then release the
handle.
3. Releasing the brakes: squeeze the handle and the
lock catch will release automatically.
Incorrect setting or use of the brake reduces
the braking effect.
A
29