How To Disassemble Your; Azalea - Invacare rea Azalea Assist Manual

7.3 HOW TO DISASSEMBLE YOUR AZALEA® TO TRANSPORT IT AS LUGGAGE
The Rea ® Azalea is easy to prepare for transport.
A
Backrest
Remove the backrest cushion by pulling it forwards,
thus separating the Velcro straps.
Loosen both knobs (A) and pull the backrest directly
upwards. On the Azalea Max, the pin (B) should be
released. Lay the backrest on the seat, where it can
remain during transport of the wheelchair. Where
applicable, detach the push handles. Be careful with
the cables that run from the rear wheel to the push
handles.
When detaching the backrest and placing it on the seat,
try to make sure that the cables hang freely.
C
Push handles braced/push bar
Loosen the two knobs (C). The height of the handles
can be adjusted simply by pulling the handles upwards
or pushing them downwards.
Legrests angle adjustable
The legrests are loosened by pushing the lever (D)
forwards whilst turning the legrests outwards. You
can then simply lift off the legrests.
42
B
D
E
Legrest fixed
The footrests are loosened by pushing the handle (E)
forwards or sidewards whilst turning the footrests
outwards. You can then simply lift off the footrests.
F
Armrests,
Press the button (F) on the spring to release before
removing the armrest.
G
Rear wheels
Remove the rear wheels by pushing buttom (G) and
pulling the wheel straight out.

Azalea

R