Foot Plate/Calf Pad/ Foot Rest - Invacare rea Azalea Assist Manual

5.9 FOOT PLATE/CALF PAD/ FOOT REST

5.9.1 Angle-adjustable footplates
Tool: 5 mm Allen key
Adjust the angle and the depth by loosening the
screw (A) at the footplate attachment with a 5
mm Allen key. Adjust the footplate to the correct
position and retighten the screw.
Do not place anything on the footplate when
the screw is loose.
5.9.2 Calf pads
D D D D D
B B B B B
Tool: 5 mm Allen key
The calf pads can be fitted in two different depth posi-
tions. Swing the pad forwards. Unscrew screw (B) using
an Allen key. Remove the large nut (C) on the reverse
side and place it in the other attachment hole. Move the
calf pad to the new position and secure it into place with
the screw.
The height of the calf pads can easily be adjusted using
the handwheel (D).
Azalea
R
5.9.3 One-piece footrest
A
1.Adjust the angle and the depth by loosening the two
C C C C C C
A
screws (A) at the footplate attachment with a 5
mm Allen key. Adjust the footplate to the correct
position and retighten the screws.
Do not place anything on the footplate when
the screws are loose.
2. The footrest can be flipped up. Lift the left side
of the footrest upwards.
Be careful not to trap your fingers between
the footrest and the reciever when folding it
down.
23