Azalea Base - Invacare rea Azalea Assist Manual

5.14 AZALEA BASE

5.14.1 Backrest angle
A
Backrest angle
1. To adjust the angle of the backrest, first loosen
nuts (A) on the rigging screw using a spanner.
2. Turn the metal tube to set the desired angle for
the back.
3. Retighten the nuts.
Azalea
R
5.14.2 Seat attachment
A.
b
B.
a
There are three options how to attach a seat to the
Azalea base.
1. Direct on the seat brackets.
2. With the H-bracket (A).
3. On a seat plate (B) .
A. H-bracket
The H-bracket is used when attaching a quick-
realease seat shell to the Azalea Base.
The H-bracket is adjustable in depth.
B. Seat plate
The seat plate can either be used as a base for a
seat cushion or for attaching seat shells and other
seating modules other than quick release shells.
When delivered, the seat base is fixated with two
screws (a). If a seat shell is to be attached the rear
part of the seat plate needs to be fixated with four
additional screws (b). These are delivered with the
wheelchair.
The seat plate is adjustable in depth.
31