Oce cm5520 User Manual page 73

2
If "FTP" was selected
Item
No.
Name
Index
Limiting Access to Desti-
nations
Host Address
File Path
User ID
Password
anonymous
PASV Mode
Proxy
Port No.
If "SMB" was selected
Item
No.
Name
Index
Limiting Access to Desti-
nations
Host Address
2-36
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is
selected, type in the number. If "0" is specified, the user box is au-
tomatically registered with the next available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display
the destination in the touch panel, check the "Main" check box.
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is select-
ed, select a level.
Type in the IP address or host name for the FTP server to be used
for transmitting (up to 63 characters). To type in the host name,
check the "Please check to enter host name." check box. If the ma-
chine is set to use IPv6, an IPv6 address can also be specified.
Type in the destination file path (up to 96 characters).
Type in the user ID (up to 47 characters).
Type in the password (up to 31 characters).
Select either "ON" or "OFF".
Select either "ON" or "OFF".
Select either "ON" or "OFF".
Type in the port number. (Range: 1 to 65535; Default: 21)
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is
selected, type in the number. If "0" is specified, the user box is au-
tomatically registered with the next available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display
the destination in the touch panel, check the "Main" check box.
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is select-
ed, select a level.
Type in the IP address or host name for the destination computer
(up to 255 characters; host name in uppercase letters). To type in
the host name, check the "Please check to enter host name." check
box. If the machine is set to use IPv6, an IPv6 address can also be
specified.
User mode
cm5520