Oce cm5520 User Manual page 92

User mode
Item
Limiting Access to Destina-
tions
Destination Information
Resolution
File Type
Simplex/Duplex
Original Type
Color
Separate Scan
Density
Background Removal
Scan Size
Application Setting
Password TX
F-Code
2-Sided Binding Direction
Special Original
Erase
cm5520
Description
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is se-
lected, select a level.
Specify the destination.
Select "Select from Address Book" or "Direct Input". To select
a destination from the address book, click the [Search from List]
button, and then select from the list of address book destina-
tions. An address book destination can also be searched for us-
ing its number or index characters. To check the transmission
destinations, click the [Check Destination] button.
If "Direct Input" is selected, type in the host address. To type in
the host name, check the "Please check to enter host name."
check box. If the machine is set to use IPv6, an IPv6 address
can also be specified. Type in the port number, and then select
the destination type.
Select the resolution.
Select the file format.
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Select the document quality, such as text or photo.
Select the color mode. The file formats that can be saved may
be limited according to the Color setting. For details, refer to the
User's Guide [Network Scanner Operations].
Select either "ON" or "OFF".
Select the density.
Adjust the density of the background.
Select the document size ("Auto" or "Standard Size").
If "Standard Size" is selected, select the size and the feed direc-
tion.
Click the [Display] button, and then specify settings for the func-
tions that are displayed.
Select whether or not to enable password transmission. If "ON"
is selected, specify the password.
Select whether or not to enable F-codes. If "Enable" is selected,
type in the SUB address and password.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long
Original" as the setting for the loaded document.
Select whether or not to enable frame erasing.
If "ON" is selected, specify the width that is erased on all sides
of the document ("Top", "Bottom", "Left" and "Right").
2
2-55