Oce cm5520 User Manual page 217

4
Term
Program address
Property
Protocol
Proxy server
PServer
Queue name
Quick memory transmis-
sion
RAW port number
realm (IPP setting)
Receiving
Redial
Reference Allowed Level
Referral setting (LDAP
setting)
Relay broadcast
4-10
Definition
This is a function for registering recipient's fax numbers where faxes
are frequently sent and received and preset transmission operation
procedures. By simply pressing the program key, the address is
specified and the communication can be automatically performed
with the specified functions.
Attribute information
When using a printer driver, various functions can be specified in the
file properties.
In the file properties, you can check the attribute information of the
file.
The rules that allow computers to communicate with other comput-
ers or peripheral devices
A server that is installed to act as an intermediary connection be-
tween each client and different servers to effectively ensure security
over the entire system for Internet connections.
Print server module under a NetWare environment that monitors,
changes, pauses, restarts, or cancels a print job.
• Name specified to each device that allows printing when network
printing.
• Required logical printer name for LPD/LPR printing
This is the method to start sending of fax by scanning one page of
the document at the same time. Even in case of multiple documents,
this is a function to send the document without overflowing the
memory.
The TCP port number used when the RAW protocol is selected for
Windows TCP printing. Usually set to 9100.
Region for performing security functions. This is constructed of au-
thentication information such as the user name and password, and
defines the security rules in the region.
This is the condition where the fax machine answers the call.
This is a function for dialing a fax number again after waiting for a
specified length of time, such as when the recipient's line is busy.
You can select either to redial manually or to redial automatically the
number.
A feature for specifying settings so that only certain people are able
to view certain destination information for the security of the infor-
mation. When synchronized with user authentication, only informa-
tion with an access permission level matching that specified for the
user can be viewed.
If there is no corresponding data on the LDAP server searched for
the destination, specify which LDAP server should be searched next
or specify an LDAP server. Specify whether or not the multifunctional
product searches this specified LDAP server.
This is a function to send the broadcast the fax via other fax (called
as a relay distribution station). When there are multiple broadcast
destinations at distant places, one of the broadcast destination is
specified to the relay station and the entire amount of the communi-
cation charges can be reduced by doing the relay transmission from
the relaying station.
Appendix
cm5520