Oce cm5520 User Manual page 90

User mode
If "Abbr. Dial" was selected
Item
No.
Name
Limiting Access to Destina-
tions
Destination Information
Resolution
File Type
Simplex/Duplex
Original Type
Separate Scan
Density
Background Removal
Scan Size
Application Setting
Timer TX
Password TX
F-Code
2-Sided Binding Direction
Special Original
cm5520
Description
Specify the registration number.
Select "Use opening number" or "Direct Input".
If "Direct Input" is selected, type in the number. If "0" is speci-
fied, the user box is automatically registered with the next avail-
able number.
Type in the name of the program (up to 24 characters).
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is se-
lected, select a level.
Specify the destination.
Select "Select from Address Book" or "Direct Input". To select
a destination from the address book, click the [Search from List]
button, and then select from the list of address book destina-
tions. An address book destination can also be searched for us-
ing its number or index characters. To check the transmission
destinations, click the [Check Destination] button.
If "Direct Input" is selected, type in the address (up to 38 char-
acters, including only numerals, #, *, T, P and E). Click the [Dis-
play] button beside "Communication Setting", and then select
the communication setting ("V34 Off", "ECM Off", "International
Communication", "Check Destination"). If the optional fax multi
line is installed, the line can be selected.
Select the resolution.
Select the file format.
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Select the document quality, such as text or photo.
Select either "ON" or "OFF".
Select the density.
Adjust the density of the background.
Select the document size ("Auto" or "Standard Size").
If "Standard Size" is selected, select the size and the feed direc-
tion.
Click the [Display] button, and then specify settings for the func-
tions that are displayed.
Select whether or not to enable timer transmission. If "ON" is
selected, specify the time.
Select whether or not to enable password transmission. If "ON"
is selected, specify the password.
Select whether or not to enable F-codes. If "Enable" is selected,
type in the SUB address and password.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long
Original" as the setting for the loaded document.
2
2-53