Oce cm5520 User Manual page 74

User mode
Item
File Path
User ID
Password
If "User Box" was selected
Item
No.
Name
Index
Limiting Access to Desti-
nations
User Box No.
If "Abbr. Dial" was selected
Note
"Abbr. Dial" appears if the optional fax kit has been installed.
Item
No.
Name
Index
Limiting Access to Desti-
nations
cm5520
Description
Type in the destination file path (up to 255 characters, uppercase
letters).
Type in the user ID for the destination computer (up to 127 charac-
ters).
Type in the password for the destination computer (up to 14 char-
acters).
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is
selected, type in the number. If "0" is specified, the user box is au-
tomatically registered with the next available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display
the destination in the touch panel, select the "Main" check box.
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is select-
ed, select a level.
Type in the number for the destination user box. (Range: 1 to
999999999) A user box can also be selected from a list by clicking
the [Search from List] button.
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is
selected, type in the number. If "0" is specified, the user box is au-
tomatically registered with the next available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display
the destination in the touch panel, check the "Main" check box.
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is select-
ed, select a level.
2
2-37