Oce cm5520 User Manual page 88

User mode
Item
[Return to Defaults] button
If "User Box" was selected
Item
No.
Name
Limiting Access to Destina-
tions
Destination Information
Resolution
File Type
File Name
Page Setting
Simplex/Duplex
Original Type
Color
Separate Scan
Density
Background Removal
Scan Size
Application Setting
cm5520
Description
Click this button to reset the settings in the Application Setting
page to their defaults.
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input"
is selected, type in the number. If "0" is specified, the user box
is automatically registered with the next available number.
Type in the name of the program (up to 24 characters).
Select the display level for the destination.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is se-
lected, select a level.
Specify the destination.
Select "Select from Address Book" or "Direct Input". To select
a destination from the address book, click the [Search from List]
button, and then select from the list of address book destina-
tions. An address book destination can also be searched for us-
ing its number or index characters. To check the transmission
destinations, click the [Check Destination] button. If "Direct In-
put" is selected, type in the number for the user box destination,
or click the [Select from List] button and select from the list (1 to
999999999).
Select the resolution.
Select the file format.
Type in the file name (up to 30 characters).
Select how the data is to be saved.
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Select the document quality, such as text or photo.
Select the color mode. The file formats that can be saved may
be limited according to the Color setting. For details, refer to the
User's Guide [Network Scanner Operations].
Select either "ON" or "OFF".
Select the density.
Adjust the density of the background.
Select the document size ("Auto", "Standard Size" or "Custom
Size").
If "Standard Size" is selected, select the size and the feed direc-
tion.
If "Custom Size" is selected, specify the height and width.
Click the [Display] button, and then specify settings for the func-
tions that are displayed.
2
2-51