Oce cm5520 User Manual page 211

4
Term
DPI (dpi)
Driver
DSN
Dynamic authentication
(LDAP setting)
ECM
Ethernet
Fax ID
F code
File extension
Forced memory recep-
tion
Frame erase
Frame type
FTP
G3
Gateway
4-4
Definition
Abbreviation for Dots Per Inch. A resolution unit used by printers and
scanners. Indicates how many dots per inch are represented in an
image. The higher the value, the higher the resolution.
Software that works as a bridge between a computer and a periph-
eral device.
Abbreviation for Delivery Status Notifications. A delivery status noti-
fication message that is sent back to the sender at the time the E-
mail is received at the recipients mail server.
An authentication method option for connecting to the LDAP server
from the multifunctional product. Select this option if the name and
password for logging on to the LDAP server must be entered each
time by the user when referencing the destination information from
the LDAP server.
(Error Correction Mode: Error correction mode) Error resend mode of
G3 communication. It confirms whether the data is correctly sent to
the recipient or not, and if it is not correctly sent, it communicates by
resending the same data. If the recipient is set for the ECM mode
and the communication is done in ECM unless ECM off is specified
in this machine.
LAN transmission line standard
The identifying code for the mutual recognition when transmitting
faxes. Normally the fax number is registered as the fax ID.
This is the communication procedure about the usage of sub ad-
dress of T.30* standardized by ITU-T (international telecommunica-
tion union) provided by Japanese Communications Industrial
Corporation. In the communication between fax with F code func-
tion, various functions that uses F code can be used even if the mak-
er is different. In this machine, F code is used in the bulletin boards,
relay request, relay transmissions, confidential communication,
password transmission. (*Communication standard)
The characters added to the file name in order to differentiate file for-
mats. The file extension is added after a period, for example, ".bmp"
or ".jpg".
This is the function to store the received document in memory and
to print if required.
This is a function to erase the black shadow around the document
and then transmitting the fax, for example, when scanning the doc-
ument formed of booklet or when scanning a document by keeping
ADF open.
Type of communication format used in a NetWare environment.
Communication is not possible if the same frame type is not used.
Abbreviation for File Transfer Protocol. A protocol for transferring
files over the Internet or an intranet on the TCP/IP network.
This is a fax communication mode standardized by the ITU-T (Inter-
national Telecommunication Union). The communication modes are
G3 and G4. G3 is currently the most popularly used mode.
Hardware and software used as the point where a network is con-
nected to a network. A gateway also changes data formats, ad-
dresses, and protocols according to the connected network.
Appendix
cm5520