Oce cm5520 User Manual page 182

Administrator mode
Item
POP Server Address
Login Name
Password
APOP Authentication
MDN Response
Connection Timeout
Port Number
Use SSL/TLS and Port No.
(SSL/TLS)
Check for New Messages
Polling Interval
cm5520
Description
Type in the address of the reception POP server. (Format:
***.***.***.*** or FQ DN: Range for ***: 0 to 255) To type in a host
name, select the "Please check to enter host name." check box.
If the machine is set to use IPv6, an IPv6 address can also be
specified.
Before entering a host name, check that the DNS setting is cor-
rectly specified. For details, refer to "TCP/IP Setting - TCP/IP
Setting" on page 3-73.
Type in the logon name for the POP server (up to 63 characters).
Type in the password for logging on to the POP server (up to 15
characters).
Select whether or not APOP authentication is used.
Select whether MDN response is turned on or off.
Specify the amount of time until communication with the server
times out.
Type in the port number for the server. (Range: 1 to 65535)
To use SSL/TLS, select the check box. In addition, the port
number that is used can be typed in.
Select whether or not the server is automatically checked for re-
ceived e-mail messages. This appears if the Internet fax opera-
tion can be used.
Specify the polling interval. (Range: 1 to 60 minutes) This ap-
pears if the Internet fax operation can be used.
3
3-79