Oce cm5520 User Manual page 184

Administrator mode
Item
Use SSL/TLS and Port
No. (SSL/TLS)
Connection Timeout
Max Mail Size
Server Capacity
Admin. E-mail Address
Device Mail Address
POP before SMTP
POP before SMTP Time
SMTP Authentication
User ID
Password
Domain Name
Authentication Settings
Binary Division
Divided Mail Size
Reminder
If virus scanning software is used on the mail server, the binary division
feature may not be available. For details, contact your network adminis-
trator.
To receive binary divided e-mail messages, mail client software support-
ing divided reception is required. Depending on the mail client software
being used, it may not be possible to combine received e-mail messages
that have been divided.
cm5520
Description
Select whether or not SSL/TLS is used during e-mail transmissions.
To use SSL/TLS, select the check box, and then type in the port
number.
Specify the amount of time until communication with the server
times out.
Select whether or not to limit the size of sent e-mail messages.
Type in the capacity of the SMTP server when limiting e-mail mes-
sage sizes. (Range: 1 to 100 Mbytes)
Displays the administrator address.
Type in the address of the device (up to 320 characters).
Select whether or not POP before SMTP is used. In order to perform
user authentication with POP before SMTP, some settings must be
specified so that the mail server can be accessed correctly with
POP. For details, refer to "E-mail Setting - E-mail RX (POP)" on
page 3-78.
Type in the POP before SMTP period. (Range: 0 to 60 seconds)
Select whether or not SMTP server authentication is used.
Type in the user ID for performing SMTP server authentication (up
to 255 characters).
Type in the password for SMTP server authentication (up to 128
characters).
Type in the domain name for the SMTP server.
This option appears when user authentication settings have been
specified. If "SMTP Authentication" is set to "ON", select whether
user authentication or a set value is used.
Specify whether or not a large e-mail message is divided and sent
in small sections. This is used to send data that has exceeded the
maximum capacity when the maximum capacity is limited per e-
mail message on the e-mail server.
Type in the binary division size. (Range: 100 to 15000 Kbytes)
3
3-81