Appliance Setup; Remove Glass Assembly; Remove The Shipping Materials; Inspect Firebox - Quadra-Fire QFI30FB-C Owner's Manual

12 12

Appliance Setup

A. Remove Glass Assembly
See Section 12.I.
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox. Remove metal panels covering electrical compo-
nents on sides of appliance.
C. Inspect Firebox
Surface cracking or crazing of fi rebrick material is normal
and expected. All cracks are acceptable and do not require
replacement of the unit or the fi rebox with the exception of:
• Cracks compromising the surface plane of the fi rebox.
See Figure 12.1.
Figure 12.1 Surface plane of fi rebox is comprised and should be
replaced.
D. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
E. Accessories
Install approved accessories per instructions included
with accessories. Contact your dealer for a list of ap-
proved accessories.
WARNING! Risk of Fire and Electric Shock! Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazard and will void the warranty.
Quadra-Fire • QFI30FB-C, QFI35FB-C • 2221-901 Rev. S • 2/15
F. Place the Lava Rock
WARNING! Risk of Explosion! Follow lava rock place-
ment instructions in manual. DO NOT place lava rock on
burner. Improperly placed lava rock interferes with proper
burner operation.
Lava rock is shipped with this gas appliance. To place the
lava rock:
• Lava rock CANNOT be placed on the burner.
• Place lava rock in front of and to the sides of the burner.
PLACE LAVA ROCK IN GRAY AREA ONLY
Figure 12.2 Placement of Lava Rock
31