Ipi Battery Tray/Battery Installation; Control Module Operation; Programming The Rc300 To The Control Module - Quadra-Fire QFI30FB-C Owner's Manual

C. IPI Battery Tray/Battery Installation
The IntelliFire Plus system has a battery backup option.
TM
Batteries should only be placed in the battery pack when
110-120 VAC is not available. See Section 2.G.
D. Control Module Operation
See Section 2.H for control module operation instructions.
Note: if any of the original wire as
supplied with the appliance must
be replaced, it must be replaced
with type 105 °C rated wire.
ORANGE - TO VALVE
GROUND - TO VALVE
BRACKET
GREEN - TO VALVE
PLUG INTO 120V
EXISTING OUTLET
Figure 10.2 Fan Wiring Diagram
Quadra-Fire • QFI30FB-C, QFI35FB-C • 2221-901 Rev. S • 2/15
E. Programming the RC300 to the Control
Module
CAUTION! Risk of burns! DO NOT program the remote
control to the control module when fi replace is hot.
• Refer to the RC300 Installation Instructions included
in appliance manual bag to program the RC300 to the
control module.
WHT
GRN
BLK
BLK
GRN
WHT
BLK
GRN
BLK
BLOWERS
FUSE WIRE
ASSEMBLY
FUSE WIRE
ASSEMBLY
BLK
GRN
BLK
29