Mode Selection; Fm Radio - RTS DV-3400 Instruction Manual

FUNCTIONS SETUP
1. Press /
decode.
CTCSS: 67-254.1H, totally 50 groups. Default:
67HZ.
DCS: 017N-765I, totally 232 groups. "N" on the LCD
means positive code. "I" on the LCD means inverse
code. Default: 017N
2. Press [PF1] or [PF2] to save and back to standby
state.
NOTE:
The icon "N" or "L" will hide when CTCSS/DCS encode/decode
function is closed.

Mode Selection

There are two modes for option, VFO (frequency mode) and
Channel mode.
1. Under standby state, press
on the LCD twinkles.
2. Press /
OFF: Channel mode
ON: Frequency mode
3. Press [PF1]/[PF2] to exit.
NOTE:
To manually set the VFO ON/OFF, users need to enable this
function via programming software firstly.

FM Radio

1. Press repeatedly till "FM" on the LCD twinkles.
2. Press /
ON: turn on FM radio
to select desired CTCSS/DCS
repeatedly till "UFO"
to select desired mode.
to on/off the FM radio function.
18