BASIC OPERATIONS
Switch on / off the Transceiver
Switch on the Transceiver: Under power-off state, turn POWER/
VOLUME knob clockwise till hearing "Click" to switch on the
transceiver. The transceiver will announce "Power on" and current
channel.
Switch off the Transceiver: When the transceiver is in the open
state, turn POWER / VOLUME anticlockwise untill hearing "Click" to
switch off the transceiver.
Switch on/off the Jacklight
Under standby state, press the Emergency Alarm Key to switch on
the jacklight. Press the same key to switch off the light.
Volume Control
When the transceiver is in open state, turn POWER / VOLUME
knob to adjust the volume. Turn clockwise to increase the volume,
and anticlockwise to decrease the volume. You can press the
programmed key of squelch off [PF1] / [PF2] to monitor current
volume.
NOTE: You can firstly press the programmed key of squelch off
[PF1] / [PF2] to monitor the background noise and meanwhile
turn POWER / VOLUME to adjust the volume. Under the
communicating state, you can adjust volume as per your need
more accurately.
Current Channel Enquiry
Under Standby state, pressing
announce channel number.
Adjust Frequency
Under VFO( frequency mode), press
13
or
, the transceiver will
repeatedly untill the decimal