Emergency Charging - RTS DV-3400 Instruction Manual

BATTERY INFORMATION
Working Indicator
Charging Indicator
1. Plug the Li-ion battery or the transceiver installed with Li-ion
battery into the matched charger.
A. Make sure that the battery is well connected with charging
connectors.
Charging indicator---Red
2. Fully charged. Charging indicator--Green.
Note:
It takes approximately 4 hours to fully charge the battery. But,
the actual charging time depends on the battery. After fully
charged, please remember to remove the battery or transceiver
out of charger. Over charging will shorten the battery life and
reduce its performance.

Emergency Charging

Connect the transceiver directly with adaptor
or car charger to charge.
Note:
Please power off the transceiver before
charging the transceiver in this way. Also, it
takes longer time (totally 12hours) to fully
charge the transceiver in this way.
5
Transceiver Charge
Battery Charge