RTS DV-3400 Instruction Manual page 41

SAFETY INFORMATION FOR USER
transceiver is excellently designed with advanced
technology. Please observe the following precautions to perform your
obligation, prevent personal injury and ensure the safety of transceiver
usage.
1. Keep the transceiver and accessories away from children.
2. Please do not try to open or modify the transceiver without
permission, unauthorised persons may damage the product.
3. Please use RTS orginal battery and charger to avoid damage.
4. Please use RTS orginal antenna to ensure the communication distance.
5. Please do not expose the transceiver to long periods of direct
sunlight, nor place it close to heat appliances.
6. Please do not put the transceiver in excessively dusty or humid
areas.
7. Do not use harsh chemicals or cleaning solvents to clean the
transceiver.
8. Do not transmit without antenna.
9. When using this transceiver, we recommend transmitting for 1 minute
then receiving for 4 minutes. Continuous transmitting for long time
or working in high power will heat the back of the transceiver. Do not
place the transceiver's hot back close to any surface of plastic.
10.If any abnormal odor or smoke detected coming from the
transceiver, turn off the power and take off the battery pack and its
case. Then contact local RTS dealer.
User Manual Applied to: DV-3400 UHF FM Transceiver
Programming Software: RTS3400
NOTE:
When programming the transceiver, read the factory initial data
first, then rewrite the frequency and signaling etc., otherwise
errors may occur because of different frequency band etc.
VHF FM Transceiver