5. MAINTENANCE AND TROUBLESHOOTING
Disconnect power before mainte-
nance.
Service more often during severe condi-
tions.
5.1 ROUTINE MAINTENANCE
Every three (3) months, perform the opera-
tions below:
1. Replace unreadable labels
2. Clean and tighten weld terminal connections
3. Repair or replace worn hoses and cables
4. With dry compressed air, blow out the unit to
reduce the build-up of dust.
Every six (6) months perform the opera-
tions below:
Blow out the inside of the unit
Increase frequency of cleaning when oper-
ating in dirty or dusty conditions.
5.2 TROUBLESHOOTING
14