Table of Contents
Advertisement
Wireless Data Gateway
Technical Specifications
MAXIMUM POWER REQUIREMENTS /
(HEAT DISSIPATION)
Full Configuration*
AAC, – 48 Vdc Power Unit, with CPU card,
WAN card, Interface card, E&M cards
3000 Series Carrier, – 48 Vdc Power Supply
3811 Plus WDG modem
Shared Diagnostic Unit
Shared Diagnostic Control Panel
* Note: A full configuration consists of:
1 – ACCULINK Access Controller enclosure with
1 – – 48 Vdc Power Unit
1 – CPU card
1 – Dual T1/E1 Link (WAN) card
1 – Interface Card
6 – 8-Port, 4-Wire E&M cards
3 – 3000 Series Carriers (– 48 Vdc) with a total of
1 – Shared Diagnostic Control Panel
3 – Shared Diagnostic Units
48 – 3811 Plus WDG Modems
A-2
Technical Specifications for the Wireless Data Gateway
519 watts
75.0 watts
50.0 watts
November 1996
Table A-1
(2 of 2)
(1770 BTU/Hr)
11 amps
(2 amps for AAC, 3 amps for
each fully-loaded carrier)
(256.0 BTU/Hr)
(409.2 BTU/Hr)
6.0 watts
(20.5 BUT/Hr)
1.5 watts
(5.2 BTU/Hr)
1.0 watts
(3.4 BTU/Hr)
Criteria
3981-A2-GN31-20
Advertisement
Table of Contents
