Table of Contents
Advertisement
Wireless Data Gateway
Each connection requires a power cable with an AMP
connector (AMP part number 1-480698-0). To build the
cable you will need a hand crimping tool (AMP part
number 90296-2 or equivalent) to press the contacts
3-10
Contact
Common
Figure 3-10. Building the Power Input Cable
November 1996
(AMP part number 350550-1) onto the wires. Push the
finished wires into the connector housing, noting the
orientation of the – 48 Vdc lead and the Common.
See Figure 3-10.
Contact
Connector
Housing
–48 Vdc
496-13674-01
3981-A2-GN31-20
Advertisement
Table of Contents
