Switch Lever - OKIDATA ML320 Turbo Service Manual

Page: 46
Service Guide ML320/321Turbo
Chapter 3 Parts Replacement

3.3.22 Switch Lever

(1) Remove the upper cover (see 3.3.4).
(2) Remove the change lever and gears (see 3.3.17).
(3) Remove the paper pan (see 3.3.19).
(4) Remove the rear pressure assy (see 3.3.21).
(5) Pull the switch lever toward you and remove it upward.
(6) To install, follow the removal steps in reverse order.
Note on installation:
When installing the switch lever, make sure that the microswitch on the driver board works properly.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)