OKIDATA ML320 Turbo Service Manual page 49

1) Set the change lever either to the rear or the bottom position. (See Figure 2-17 above).
2) Load paper either on the push tractor or on the bottom tractor.
3) Press the "FF/LOAD" button.
4) The LF motor starts to feed the paper up to the print start position.
5) The paper feeds up to the TOF position (Factory default: 0.35 inches from the top).
Press the "FF/LOAD" button.
When the LF motor completes its operation and the sheet has not been fed in, an alarm condition results.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)