Operation At Power On - OKIDATA ML320 Turbo Service Manual

Page: 64
Service Guide ML320/321Turbo
Chapter C Software Diagnostics and Adjustments

2.2.1 Operation at power on

After power is turned on, an RST OUT signal is sent from the printer control board to reset the printer.
When the reset is canceled, the 80C51 CPU performs initialization. Initialization consists of setting the
80C51 timer and setting the serial mode.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)