Transformer Assy - OKIDATA ML320 Turbo Service Manual
Dot matrix printers
Hide thumbs
Also See for ML320 Turbo:
- Service manual (294 pages) ,
- User manual (60 pages) ,
- Quick manual (2 pages)
Table of Contents
Advertisement
Page: 40
Service Guide ML320/321Turbo
Chapter 3 Parts Replacement
3.3.16 Transformer Assy
(see 3.3.4
).
(1) Remove the upper cover
(2) Remove AC inlet 1 and AC switch 2 from the frame guide.
(3) Disconnect the cable 3 from the connector 4 on the Control/Power Supply Board 5.
(4) Remove a screw 6 and disconnect ground cable 7.
(5) Remove two screws 8 and shift the transformer Assy 9 to the left and remove it.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
- Quick Links:
- Pull-Up Roller Assy
- Rear Tractor Assy
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
