Space Rack - OKIDATA ML320 Turbo Service Manual

Page: 32
Service Guide ML320/321Turbo
Chapter 3 Parts Replacement

3.3.8 Space Rack

(see 3.3.4 ).
(1) Remove the upper cover
(2) Remove the printhead (see 3.3.1 ).
(3) Remove the shim from the carriage frame.
(4) Remove the gear case Assy (see 3.3.5 ).
(5) Remove the space motor Assy (see 3.3.7 ).
(6) Remove the spring 1.
(7) Disengage the claw on left side of space rack 2 from the frame, and remove the space rack 2 in upper
direction.
(8) To install, follow the removal steps in reverse order. Be sure to replace the shim on the carriage frame
in exactly the same position as it was before disassembly
Note on installation:
After installation, check and adjust the gap between platen and printhead (see 4-1 ).