Appendix A: Internal Switch Settings - OKIDATA 120 Handbook

APPENDIX A: INTERNAL SWITCH SETTINGS
If you remove the small panel at the back of your printer,
you'll find a set of switches numbered 1 to 8. By turning
these switches ON or OFF, you can control features like
foreign language character sets, page length and Commo-
dore device numbers. After you set these switches, the
printing features you selected will go into effect automati-
cally whenever you turn on your printer.
To set the switches:
1) Make sure the printer is OFF and unplugged.
2) Take a phillips-head screwdriver and loosen the
screw on the panel located at the back of your
printer.
A-1