ATLANTIC 125 - 200
7.6.8.
PROPORTIONING VALVE REMOVAL
TORQUE WRENCH SETTINGS
Screws (2)
•
Remove the dashboard,
•
Drain the brake circuit,
•
Release and remove the two screws (1) and the drain
valve. Collect the seals.
NOTE Mark the brake hoses with their position to avoid
confusing them on assembly.
•
Disconnect the three brake hoses. Block off the hose
ends to avoid loss of brake fluid.
•
Release and remove the two retaining screws (2) of
the proportioning valve.
•
Remove the proportioning valve.
NOTE Bleed the brake circuit on refitting,
10 Nm (1.0 kgm)
7.2.6.
2.10.2.
2.10.4.
CHASSIS
7 - 63