COOLING SYSTEM
5.2. COOLANT
5.2.1.
CHANGING COOLANT
DRAINING THE CIRCUIT
•
Remove the expansion reservoir cap,
•
Loosen clamp (2) and slide out hose (1).
•
Let the fluid flow into a suitable container for collection.
FILLING THE CRICUIT
•
Position hose (1) and secure it in place with clamp (2).
•
Top up coolant,
•
Start engine and let it run until the cooling fan switches
on. Allow engine to cool down and check again coolant
level into expansion reservoir.
•
Top up, if necessary.
5 - 4
5.5.1.
2.9.1.
2.9.1.
ATLANTIC 125 - 200