CHASSIS
7.3.4.
CENTRE STAND REMOVAL
TORQUE WRENCH SETTINGS
Nut (1)
•
Place the vehicle on the side stand.
•
Unhook the two springs.
•
Release and remove the nut (1).
•
Withdraw the bolt from the opposite end.
•
Remove the centre stand.
WARNING
Grease the sliding areas on refitting and avoid
damage to the seals. Tighten the nut and make
sure the stand folds up smoothly in the correct
position.
7 - 44
27 Nm (2.7 kgm)
ATLANTIC 125 - 200